ENTES EPM-04 Multimeter

 Entes EPM-04

Multimeter

1)Phase currents (IL), Neutral current (IN), Phase-Phase and Phase-Neutral voltages can be measured .

2)Existence of live phases can be observed by L1-L2-L3 LEDs on the device.

3) Min. and max. values for measured currents and voltages can be monitored with only one button.

4) Max. demand values for measured current can be monitored, demand time can be defined in menu.

5)A 4 digit password can be defined from pin menu in order to prevent the change of settings by unauthorized person.

6)Current transformer ratio is programmable. (1 .... 2000) Current transformer ratio can be programmed in term of turn number between 1.....20 (for CT-25 adapted devices). Voltage transformer ratio is programmable. (0.1 .... 4000)

7) A user defined measurement range is used for monitoring the voltages and currents; and Out1 & Out2 outputs are used for warning the user and disconnecting the device in case of exceeding the limits of measurement range.

8)In case of using the device for measuring the current values of motors etc., start delay (AUto rSt) function can be used for preventing the equipment against the improper tripping, which is because of the demurrage current.

9)When a failure has occured use the Latch function, in order to keep the device with saving its position (Latched), even if the failure conditions are removed.

7th, 8th and 9th subjects are valid for EPM-04C/04CS.

All tests have been done.
Our sales are postpaid and guaranteed.
We provide on-site repair and technical service.