WAGO
WAGO 750-4612 Channel analogue InputThe input module is connected directly to the Pt resistance sensors. Only 2 or 3 conductor sensors can be connected. The module automatically linearizes the entire temperature range. The sensor error is indicated by a red LED. The green LED indicates readiness for..
€0.00
Ex Tax:€0.00
WAGO 750-4672 Channel Analogue InputThe analog input module processes signals with a standard amplitude of 0-10 V. The input signal is transmitted electrically isolated in 12-bit resolution. The module is supplied by the internal system supply. Module input channels have one common ground potential...
€0.00
Ex Tax:€0.00
WAGO 750-4672 Channel Analogue InputThe analog input module processes signals with a standard amplitude of 0-10 V. The input signal is transmitted electrically isolated in 12-bit resolution. The module is supplied by the internal system supply. Module input channels have one common ground potential...
€0.00
Ex Tax:€0.00
WAGO 750-4752 Channel Analogue InputThe analog input module processes AC and DC currents from 0 to 1 A (rms). The module measures the rms value of the current and displays it with a resolution of 100 µA. The maximum current must not exceed 2. The differential inputs are electrically isolated. The fi..
€0.00
Ex Tax:€0.00
WAGO 750-638 2 incrementing / decreasing counters2 incrementing / decreasing counters; 16 bits; 500 Hz; Light grey The I / O module has two counters that independently count 24VDC binary pulses. The data is transmitted to the control via the fieldbus. The counters can be set or reset with ..
€0.00
Ex Tax:€0.00
WAGO 750-5044 channel digital outputWAGO 1 X 750-504 4 channel digital output, 4 channel digital output; 24 VDC; 0.5 A; Light greyControl signals are sent from the automation device to the actuators connected to the digital output module.All outputs are short circuit protected.Field and system level..
€0.00
Ex Tax:€0.00
WAGO 750-454Analog Input ModuleThe analog input module receives signals with standardized values of 0-20mA and 4-20mA. The input signal is electrically isolated and will be transmitted with a resolution of 12 bits. The internal system supply (via the data bus contacts) is used for the power supply o..
€0.00
Ex Tax:€0.00
Out Of Stock
WAGO 750-469Analog Input ModuleThis input module allows the direct connection of two thermocouples. Internal electrical isolation allows operation of grounded sensors. The module automatically linearizes the entire temperature range. Cold junction compensation is utilized to compensate for the clamp..
WAGO 750-474analog input moduleWAGO 1 X 750-474 The analog input module feeds the transducers, receives the transmitted analog signals and sends the signals to the fieldbus electrically isolated. The 24V field voltage supply is supplied from the power bridge contacts of the module. The shield is con..
€0.00
Ex Tax:€0.00
WAGO 750-477Analog Input Module The analog input module processes AC and DC voltages between 0 and 10V (rms). The module measures the rms value of the voltage and displays it with a resolution of 1 mV. The maximum voltage must not exceed 20 V. The differential inputs are electrically isolated. ..
€0.00
Ex Tax:€0.00
WAGO 750-628Bus Extension Coupler ModuleWAGO 1 X 750-628 Bus Extension Coupler Module, Bus Extension Coupler Module; light grayThe coupler module for the internal data bus extension module 750-628 replaces the fieldbus coupler/controller at an I/O terminal block. It is also the mating piece for the ..
€0.00
Ex Tax:€0.00
WAGO 750-604Connection ModuleThe field side connection module provides 0 V potential for the outputs of the 8-channel output module 750-530, eliminating external terminal blocks. The 24 V supply and 0 V potential are derived from the internal power jumper contacts of an adjacent upstream I/O module...
€0.00
Ex Tax:€0.00